Show Ptp Lock-Status - Juniper ACX1000 Configuration Manual

show ptp lock-status

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 211: show ptp lock-status Output Fields
Field Name Field Description
State of the slave clock with respect to its master clock:
Lock State
Time offset information of a slave clock with respect to its master clock. Precision of this time offset
Phase offset
is 1 nanosecond.
Copyright © 2017, Juniper Networks, Inc.
show ptp lock-status
Command introduced in Junos OS Release 12.2.
Command introduced in Junos OS Release 17.3 for the QFX Series.
(ACX Series, MX80, MX240, MX480, MX960 routers, and QFX Series switches) Display
information about the lock status of the slave. The output verifies whether the slave is
aligned to the grandmaster (master clock) or not.
detail—Display detailed information about the lock status of the slave.
view
IEEE 1588v2 PTP Boundary Clock Overview on page 234
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
Precision Time Protocol Overview
show ptp lock-status on page 2946
show ptp lock-status (ACX Series) on page 2946
show ptp lock-status detail (ACX Series) on page 2946
show ptp lock-status detail (with IPv6 addresses for PTP master/slave) on page 2946
Table 211 on page 2945 lists the output fields for the
fields are listed in the approximate order in which they appear.
Freerun
Holdover
Phase Aligned
Acquiring
Initializing
Freq locked
Chapter 42: Operational Commands
command. Output
show ptp lock-status
2945