Show Route Community - Juniper ACX1000 Configuration Manual

show route community

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2991
Syntax (EX Series Switches) on page 2991
show route community as-number:community-value
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route community as-number:community-value
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the route entries in each routing table that are members of a Border Gateway
Protocol (BGP) community.
as-number:community-value—One or more community identifiers.
number, and
community-value
than one community identifier, enclose the identifiers in double quotation marks.
Community identifiers can include wildcards.
For example:
user@host> show route table inet.0 protocol bgp community "12083:6015"
community "12083:65551"
or
user@host> show route table inet.0 protocol bgp community [12083:6014
12083:65551]
brief | detail | extensive | terse—(Optional) Display the specified level of output.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Specifying the community option displays all routes matching the community found
within the routing table. The community option does not limit the output to only the
routes being advertised to the neighbor after any egress routing policy.
view
show route detail on page 3000
Chapter 42: Operational Commands
is the community identifier. When you specify more
is the AS
as-number
2991