Juniper ACX1000 Configuration Manual page 2948

ACX Series Universal Access Router Configuration Guide
Table 196: show path-computation-client statistics Output
Fields (continued)
Field Name Field Description
Remote Dead Dead timer used by or for the PCE.
timer
PCErr-recv Information about type, value, and number of PC
Error messages received.
PCErr-sent Information about type, value, and number of PC
Error messages sent.
Max unknown Maximum number of unknown messages received
messages for a PCEP session. Recommended value is
number of unknown messages received by a PCC
or PCE is greater than or equal to the maximum
number, the PCEP session is closed.
Keepalives Number of Keepalive messages received by a PCC
received from a PCE.
Keepalives sent Number of Keepalive messages sent by a PCC to
a PCE.
Elapsed as main Time (in seconds) the PCE is in the main
current mastership state.
Elapsed as main Time (in seconds) the PCE became main from the
total last PCCD restart.
Unknown Number of unknown messages received per minute.
msgs/min rate
Session failures Number of PCEP session failures with the PCE.
Delegation timeout Time (in seconds) left for LSP delegation to
in timeout.
Delegation failures Number of LSP delegation failures.
Connection down Time (in seconds) since the PCEP session is down.
Sample Output
show path-computation-client statistics all
2890
user@host> show path-computation-client statistics all
PCE pce1
General
IP address
Priority
Level of Output
All levels
All levels
All levels
detail
. If the
5
detail
detail
detail
detail
detail
detail
detail
detail
detail
: 10.209.57.166
: 2
Copyright © 2017, Juniper Networks, Inc.