Juniper ACX1000 Configuration Manual page 2833

show oam ethernet connectivity-fault-
management interfaces detail (One-Way ETH-DM)
show oam ethernet connectivity-fault-
management interfaces detail
(Connection Protection TLV Configured)
Copyright © 2017, Juniper Networks, Inc.
Valid AIS frames transmitted
Valid AIS frames received
SLM sent
Valid SLM received
Invalid SLM received
SLR sent
Valid SLR received
Invalid SLR received
Remote MEP count: 2
Identifier MAC address
2001 00:90:69:0b:7f:71
4001 00:90:69:0b:09:c5
user@host show oam ethernet connectivity-fault-management interfaces detail
Interface name: ge-0/2/5.0, Interface status: Active, Link status: Up
Maintenance domain name: md6, Format: string, Level: 6
Maintenance association name: ma6, Format: string
Continuity-check status: enabled, Interval: 100ms, Loss-threshold: 3 frames
MEP identifier: 101, Direction: down, MAC address: 00:90:69:0a:48:57
MEP status: running
Defects:
Remote MEP not receiving CCM
Erroneous CCM received
Cross-connect CCM received
RDI sent by some MEP
Statistics:
CCMs sent
CCMs received out of sequence
LBMs sent
Valid in-order LBRs received
Valid out-of-order LBRs received
LBRs received with corrupted data
LBRs sent
LTMs sent
LTMs received
LTRs sent
LTRs received
Sequence number of next LTM request
1DMs sent
Valid 1DMs received
Invalid 1DMs received
DMMs sent
DMRs sent
Valid DMRs received
Invalid DMRs received
Remote MEP count: 1
Identifier MAC address
201 00:90:69:0a:43:94
user@hostshow oam ethernet connectivity-fault-management interfaces detail
Interface name: xe-6/2/0.0 , Interface status: Active, Link status: Up
Chapter 42: Operational Commands
: 0
: 0
: 10
: 20
: 0
: 20
: 10
: 0
State Interface
ok ge-5/2/9.0
ok ge-5/2/9.0
: no
: no
: no
: no
: 1590
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 1542035464
: 10
: 0
: 0
: 0
: 0
: 0
: 0
State Interface
ok ge-0/2/5.0
2775