Juniper ACX1000 Configuration Manual page 2813

Table 175: show igmp snooping interface Output Fields (continued)
Field Name Field Description
Learning domain for snooping.
Learning Domain
Frequency (in seconds) with which this router sends membership queries when it is
IGMP Query Interval
the querier.
IGMP Query Time (in seconds) that the router waits for a response to a general query.
Response Interval
IGMP Last Member Time (in seconds) that the router waits for a report in response to a group-specific
query.
Query Interval
IGMP Robustness Number of times the router retries a query.
Count
State of immediate leave:
immediate-leave
Router interfaces that are part of this learning domain.
router-interface
Group limit Maximum number of (source,group) pairs allowed per interface. When a group limit
is not configured, this field is not shown.
Interfaces that are being snooped in this learning domain.
interface
Number of groups on the interface.
Groups
State of the interface:
State
Number of active multicast groups attached to the logical interface.
Up Groups
Timeout for group membership. If no report is received for these groups before the
IGMP Membeship
timeout expires, the group membership is removed.
Timeout
Time that the router waits for the IGMP querier to send a query.
IGMP Other Querier
Present Timeout
Sample Output
show igmp snooping interface
Copyright © 2017, Juniper Networks, Inc.
or .
On Off
or .
Up Down
user@host> show igmp snooping interface ge-0/1/4
Instance: default-switch
Bridge-Domain: sample
Learning-Domain: default
Interface: ge-0/1/4.0
State: Up Groups: 0
Immediate leave: Off
Router interface: no
Chapter 42: Operational Commands
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
2755