Juniper ACX1000 Configuration Manual page 2937

Sample Output
show pfe tcam errors
show pfe tcam errors all-tcam-stages
show pfe tcam errors all-tcam-stages detail
Copyright © 2017, Juniper Networks, Inc.
Tcam-slice represents the hardware TCAM block, where the TCAM lookup can happen
in parallel. Tcam-group represents the logical representation of one or more tcam-slices.
user@host> show pfe tcam errors
fw-vpls-in Resource-shortage[Entries:1, Counters:1, Policers:0]
user@host> show pfe tcam errors all-tcam-stages
fw-vpls-in Resource-shortage[Entries:1, Counters:1, Policers:0]
user@host> show pfe tcam errors all-tcam-stages detail
Tcam Resource Stage: Pre-Ingress
--------------------------------
No tcam usage
Tcam Resource Stage: Ingress
----------------------------
Group: 7, Mode: DOUBLE, Hw grps used: 2, Tcam apps: 2
Errors
Tcam-Entries 0
Counters 0
Policers 0
Group: 5, Mode: SINGLE, Hw grps used: 1, Tcam apps: 1
Errors
Tcam-Entries 0
Counters 0
Policers 0
Group: 8, Mode: DOUBLE, Hw grps used: 4, Tcam apps: 1
Errors
Tcam-Entries 0
Counters 0
Policers 0
Group: 9, Mode: DOUBLE, Hw grps used: 0, Tcam apps: 1
Errors
Tcam-Entries 1
Counters 1
Policers 0
App error statistics:
----------------------
App-Name Entries Counters Policers Precedence
Related-App-Name ..
-----------------------------------------------------------------
fw-vpls-in
fw-semantics
Tcam Resource Stage: Egress
---------------------------
No tcam usage
Resource-Shortage
0
0
0
Resource-Shortage
0
0
0
Resource-Shortage
0
0
0
Resource-Shortage
1
1
0
1 1 0
0 X X
Chapter 42: Operational Commands
State
2 FAILED
1 OK
2879