Juniper ACX1000 Configuration Manual page 2725

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Table 155: Aggregated Ethernet show interfaces Output Fields (continued)
Field Name
Field Description
State of the physical interface. Possible values are described in the "Enabled
Enabled
Field" section under Common Output Fields Description.
Interface index
Index number of the physical interface, which reflects its initialization sequence.
SNMP ifIndex
SNMP index number for the physical interface.
Generation
Unique number for use by Juniper Networks technical support only.
Link-level type
Encapsulation being used on the physical interface.
MTU
Maximum transmission unit size on the physical interface.
Speed at which the interface is running.
Speed
Loopback status:
Loopback
Local
or
Source filtering
Source filtering status:
Flow control status:
Flow control
Number of child links that must be operational for the aggregate interface to
Minimum links
be operational.
needed
Device flags
Information about the physical device. Possible values are described in the
"Device Flags" section under Common Output Fields Description.
Information about the interface. Possible values are described in the "Interfaces
Interface flags
Flags" section under Common Output Fields Description.
Current address
Configured MAC address.
Hardware address
Hardware MAC address.
Last flapped
Date, time, and how long ago the interface went from down to up or from up
to down. The format is
timezone (hours:minutes:seconds ago)
10:52:40 PDT (04:33:20 ago).
Input Rate
Input rate in bits per second (bps) and packets per second (pps).
Output Rate
Output rate in bps and pps.
Statistics last
Time when the statistics for the interface were last set to zero.
cleared
Copyright © 2017, Juniper Networks, Inc.
or
. If loopback is enabled, type of loopback:
Enabled
Disabled
Remote
.
Enabled
or
Disabled
or
Enabled
Disabled
Last flapped: year-month-day hours:minutes:seconds
. For example,
.
.
Last flapped: 2002-04-26
Chapter 42: Operational Commands
Level of Output
All levels
All levels
detail extensive
none
detail extensive
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
detail extensive
detail extensive
detail extensive
None specified
None specified
detail extensive
2667

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents