Juniper ACX1000 Configuration Manual page 2969

Table 201: show ppp statistics Output Fields (continued)
Field Name Field Description
Type of structure for which memory is allocated.
Type
Queued rtsock msgs
is unable to send a route socket message to the kernel (typically because of
congestion of the route socket interface), the message is queued for deferred
processing.
PPP session
such as authentication, sequence number, LCP session, and NCP session
information.
Interface address
Stores the information about the interface address that PPP obtains from
the kernel.
Destination profile
with an interface address.
ML link settings
name and compressed real-time transport protocol (CRTP) settings.
IPCP blocked address
example, when the interface address is within the range of an address pool,
it will be implicitly blocked), this structure is used to store the address in the
pool.
PPP session trace
each session listed at the [
IFL redundancy state
availability (HA) operation.
Protocol family
obtains from the kernel.
Copyright © 2017, Juniper Networks, Inc.
—Queued route socket messages. When a PPP process
—Active PPP session. Stores all the information for a PPP session,
—Interface address associated with a PPP connection.
—Stores the destination profile information associated
—Stores information about an MLPPP link, such as the bundle
—When addresses are blocked in an address pool (for
—A PPP session trace is allocated for record keeping for
set protocols ppp monitor-session
—Stores redundancy state information needed for high
—Stores the information about the protocol family that PPP
Chapter 42: Operational Commands
Level of Output
detail
] hierarchy level.
2911