Show (Ospf | Ospf3) Statistics - Juniper ACX1000 Configuration Manual

show (ospf | ospf3) statistics

List of Syntax
Syntax
Syntax (EX Series
Switch and QFX
Series)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2863
Syntax (EX Series Switch and QFX Series) on page 2863
show (ospf | ospf3) statistics
<instance instance-name>
<logical-system (all | logical-system-name)>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
show (ospf | ospf3) statistics
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.2.
realm
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display OSPF statistics.
none—Display OSPF statistics for all routing instances.
instance instance-name—(Optional) Display all statistics for the specified routing
instance.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(Optional) (OSPFv3 only)
Display all statistics for the specified OSPFv3 realm, or address family. Use the
option to specify an address family for OSPFv3 other than IPv6 unicast, which is the
default.
view
clear (ospf | ospf3) statistics
show ospf statistics on page 2865
show ospf statistics logical-system all on page 2865
show ospf3 statistics on page 2866
Table 192 on page 2864 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 42: Operational Commands
show (ospf | ospf3) statistics
realm
command.
2863