Show Lldp - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show lldp

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2730
show lldp
<detail>
Command introduced in Junos OS Release 9.6.
Display information about the Link Layer Discovery Protocol (LLDP).
detail—(Optional) Display the detailed output level.
view
show lldp on page 2732
show lldp detail on page 2732
Table 168 on page 2730 describes the output fields for the
fields are listed in the approximate order in which they appear.
Table 168: show lldp Output Fields
Field Name Field Description
Status of LLDP:
LLDP
Value of the advertisement interval parameter.
Advertisement
interval
Value of the transmit delay parameter.
Transmit delay
Value of the hold timer parameter.
Hold timer
Value of the notification interval parameter.
Notification interval
Value of the configuration trap parameter.
Config Trap Interval
Value of the connection hold timer parameter.
Connection Hold
timer
interface-name—Indicates the interface name as the port information for the
Port ID TLV subtype
local device.
locally-assigned
locally assigned value of SNMP index of the interface.
For more information about port ID TLV subtype, see port-id-subtype..
show lldp
or .
Enabled Disabled
—Indicates that the sub-type for port ID TLV generation is
Copyright © 2017, Juniper Networks, Inc.
command. Output