Show (Ospf | Ospf3) Interface - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show (ospf | ospf3) interface

List of Syntax
Syntax
Syntax (EX Series
Switches and QFX
Series)
Release Information
Description
Options
2834
Syntax on page 2834
Syntax (EX Series Switches and QFX Series) on page 2834
show (ospf | ospf3) interface
<brief | detail | extensive>
<area area-id>
<interface-name>
<instance instance-name>
<logical-system (all | logical-system-name)>
<realm (ip4-multicast | ipv4-unicast | ipv6-multicast)>
show (ospf | ospf3) interface
<brief | detail | extensive>
<area area-id>
<interface-name>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.2.
area
area option introduced in Junos OS Release 9.2 for EX Series switches.
option introduced in Junos OS Release 9.2.
realm
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display the status of OSPF interfaces.
none—Display standard information about the status of all OSPF interfaces for all routing
instances
brief | detail | extensive—(Optional) Display the specified level of output.
area area-id—(Optional) Display information about the interfaces that belong to the
specified area.
interface-name—(Optional) Display information for the specified interface.
instance instance-name—(Optional) Display all OSPF interfaces under the named routing
instance.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(OSPFv3 only) (Optional)
Display information about the interfaces for the specified OSPFv3 realm, or address
family. Use the option to specify an address family for OSPFv3 other than IPv6
realm
unicast, which is the default.
Copyright © 2017, Juniper Networks, Inc.