Juniper ACX1000 Configuration Manual page 2869

show oam ethernet connectivity-fault-management server-mep detail
show oam ethernet connectivity-fault-management server-mep brief
show oam ethernet connectivity-fault-management server-mep extensive
Copyright © 2017, Juniper Networks, Inc.
user@host> show oam ethernet connectivity-fault-management server-mep 1000 detail
MEP identifier: 1000, Status: up
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: down, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
Defects:
l2circuit-defect
l2vpn-defect
link-loss-defect
Statistics:
Valid AISs generated
user@host> show oam ethernet connectivity-fault-management server-mep 1000 brief
MEP identifier: 1000, Status: up
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: down, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
user@host> show oam ethernet connectivity-fault-management server-mep 1000 extensive
MEP identifier: 1000, Status: down
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: up, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
Defects:
l2circuit-defect
l2vpn-defect
link-loss-defect
Statistics:
Valid AISs generated
Chapter 42: Operational Commands
: no
: no
: no
: 0
: yes
: no
: no
: 16
2811