Show Route - Juniper ACX1000 Configuration Manual

show route

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2951
Syntax (EX Series Switches) on page 2951
show route
<all>
<destination-prefix>
<logical-system (all | logical-system-name)>
<private>
<te-ipv4-prefix-ip te-ipv4-prefix-ip>
<te-ipv4-prefix-node-ip te-ipv4-prefix-node-ip>
<te-ipv4-prefix-node-iso te-ipv4-prefix-node-iso>
show route
<all>
<destination-prefix>
<private>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Option introduced in Junos OS Release 9.5.
private
Option private introduced in Junos OS Release 9.5 for EX Series switches.
Command introduced in Junos OS Release 15.1R3 on MX Series routers for enhanced
subscriber management.
Option
display-client-data
MX240, MX480, MX960, MX2010, MX2020, vMX Series routers.
Options te-ipv4-prefix-ip , te-ipv4-prefix-node-ip
in Junos OS Release 17.2R1 on MX Series and PTX Series.
Display the active entries in the routing tables.
none—Display brief information about all active entries in the routing tables.
all—(Optional) Display information about all routing tables, including private, or internal,
routing tables.
destination-prefix—(Optional) Display active entries for the specified address or range
of addresses.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
private—(Optional) Display information only about all private, or internal, routing tables.
display-client-data —(Optional) Display client id and cookie information for routes
installed by the routing protocol process client applications.
te-ipv4-prefix-ip te-ipv4-prefix-ip—(Optional) Display IPv4 address of the
traffic-engineering prefix, without the mask length if present in the routing table.
introduced in Junos OS Release 16.2R1 on MX80, MX104,
, and
Chapter 42: Operational Commands
te-ipv4-prefix-node-iso introduced
2951