Show Protection-Group Ethernet-Ring Statistics - Juniper ACX1000 Configuration Manual

show protection-group ethernet-ring statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
show protection-group ethernet-ring statistics group-name group-name
<brief | detail>
Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.1 for EX Series switches.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers.
Display statistics regarding Automatic Protection Switching (APS) protection groups on
an Ethernet ring.
group-name—Display statistics for the protection group. If you omit this option, protection
group statistics for all configured groups are displayed.
brief —Display brief statistics for the protection group.
—Display detailed statistics for the protection group.
detail
view
show protection-group ethernet-ring data-channel
show protection-group ethernet-ring aps on page 2916
show protection-group ethernet-ring node-state on page 2923
show protection-group ethernet-ring interface on page 2920
show protection-group ethernet-ring vlan on page 2932
show protection-group ethernet-ring statistics (EX Series Switch) on page 2929
show protection-group ethernet-ring statistics (MX Series Router) on page 2929
show protection-group ethernet-ring statistics detail (Specific Group)(MX Series
Router) on page 2930
show protection-group ethernet-ring statistics (Owner Node, Failure Condition on
ACX and MX Router) on page 2930
show protection-group ethernet-ring statisitics (Ring Node, Failure Condition on ACX
and MX Router) on page 2931
Table 205 on page 2928 lists the output fields for the
statistics command.
Chapter 42: Operational Commands
show protection-group ethernet-ring
2927