Juniper ACX1000 Configuration Manual page 3073

Copyright © 2017, Juniper Networks, Inc.
Age: 1:31:44
Task: IF
AS path: I
ff02::2/128 (1 entry, 1 announced)
*PIM Preference: 0
Next-hop reference count: 18
State: <Active NoReadvrt Int>
Local AS:
Age: 1:31:45
Task: PIM Recv6
Announcement bits (1): 0-KRT
AS path: I
ff02::d/128 (1 entry, 1 announced)
*PIM Preference: 0
Next-hop reference count: 18
State: <Active NoReadvrt Int>
Local AS:
Age: 1:31:45
Task: PIM Recv6
Announcement bits (1): 0-KRT
AS path: I
ff02::16/128 (1 entry, 1 announced)
*MLD Preference: 0
Next-hop reference count: 18
State: <Active NoReadvrt Int>
Local AS:
Age: 1:31:43
Task: MLD
Announcement bits (1): 0-KRT
AS path: I
private.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
fe80::280:42ff:fe10:f179/128 (1 entry, 0 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 1
Next hop: via lo0.16385, selected
State: <Active NoReadvrt Int>
Age: 1:31:44
Task: IF
AS path: I
green.l2vpn.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
10.255.70.103:1:3:1/96 (1 entry, 1 announced)
*BGP Preference: 170/-101
Route Distinguisher: 10.255.70.103:1
Next-hop reference count: 7
Source: 10.255.70.103
Protocol next hop: 10.255.70.103
Indirect next hop: 2 no-forward
State: <Secondary Active Int Ext>
Local AS:
Age: 1:25:49
AIGP 210
Task: BGP_69.10.255.70.103+179
Announcement bits (1): 0-green-l2vpn
Chapter 42: Operational Commands
69
69
69
69 Peer AS: 69
Metric2: 1
3015