Juniper ACX1000 Configuration Manual page 2850

ACX Series Universal Access Router Configuration Guide
Output Fields
Table 180: show oam ethernet connectivity-fault-management mep-database Output Fields
Field Name Field Description
Maintenance domain name.
Maintenance domain
name
Format (Maintenance Maintenance domain name format configured.
domain)
Level Maintenance domain level configured.
Maintenance Maintenance association name.
association name
Format (Maintenance Maintenance association name format configured.
association)
Continuity-check status Continuity-check status.
Interval Continuity-check message interval.
Loss-threshold Lost continuity-check message threshold.
Connection Protection Status of the connection protection TLV, if configured on the MEP interface:
TLV
If
yes
displayed:
If set to
Prefer me
used for signaling a manual-switch command to remote side.
Its value can be
Used for protection decision coordination. Its value is set to
Protection in use
is currently transmitting the user traffic to protection path.
Its value can be
2792
show oam ethernet connectivity-fault-management mep-database local-mep
remote-mep on page 2798
show oam ethernet connectivity-fault-management mep-database remote-mep
(Action Profile Event) on page 2798
show oam ethernet connectivity-fault-management mep-database (Connection
Protection TLV Configured) on page 2798
show oam ethernet connectivity-fault-management mep-database on page 2799
show oam ethernet connectivity-fault-management mep-database (enhanced
continuity measurement) on page 2800
Table 180 on page 2792 lists the output fields for the
connectivity-fault-management mep-database
approximate order in which they appear.
, then the transmitted connection protection TLV is decoded and the following three fields are
,
Prefer me Protection in use
, the path through which CCM was transmitted is preferred (unless the path fails). It is
yes
or .
yes no
or .
yes no
show oam ethernet
command. Output fields are listed in the
,
FRR Flag
if the endpoint transmitting the CCM
yes
Copyright © 2017, Juniper Networks, Inc.
no , yes