Juniper ACX1000 Configuration Manual page 2970

ACX Series Universal Access Router Configuration Guide
Table 201: show ppp statistics Output Fields (continued)
Field Name Field Description
Type (continued) ML bundle settings
for a MLPPP bundle.
PPP LCP session
configuring, and testing the data-link connection. Stores the information for
an LCP session, such as negotiated options, current state, and statistics.
PPP NCP session
link connection process. Stores the information for an NCP session, such as
negotiated options, current state, address family, and statistics.
Physical interface
PPP obtains from the kernel.
Access profile
hierarchy level for each profile.
ML wait entry
its addition to the PPP process. Links are saved here, and when the bundle
is added, are properly assigned to the bundle.
Group profile
such as the primary and secondary Domain Name System (DNS), primary
and secondary NDNS, and address pool name.
Profile client
(information obtained from the [
hierarchy level.
PPP Auth session
authentication protocol parameters.
Logical interface
obtains from the kernel.
Non-tagged
type.
2912
—Multilink bundle settings. Stores the context information
—PPP Link Control Protocol session, used for establishing,
—PPP Network Control Protocol (NCP) phase in the PPP
—Stores the information about the physical interface that
—Stores the information found at the [
—Created when there are MLPPP links joining a bundle. before
—Stores information set in the PPP stanza of a group profile,
—Stores the per-client information of the access profile
set access profile name client client-name
—PPP authentication session. Stores all the session-specific
—Stores the information about the logical interface that PPP
—Generic catch-all for allocations not of a particular structure
Level of Output
detail
]
edit access profile
]
Copyright © 2017, Juniper Networks, Inc.