Juniper ACX1000 Configuration Manual page 2866

ACX Series Universal Access Router Configuration Guide
Table 182: show oam ethernet connectivity-fault-management synthetic-loss-statistics Output
Fields
Output Field Name
MEP identifier
MAC address
Remote MEP count
Remote MEP identifier
Remote MAC address
SLM packets sent
SLM packets received
SLR packets sent
SLR packets received
Local TXFC1 value
Local RXFC1 value
Last Received SLR frame TXFCf(tc)
Last Received SLR frame TXFCb(t
Frame loss (near-end)
Frame loss (far-end)
Sample Output
show oam ethernet connectivity-fault-
management
2808
Field Description
Maintenance association end point (MEP) numeric identifier.
Unicast MAC address configured for the MEP.
Number of remote MEPs (unless you specify the
Numeric identifier of the remote MEP.
Unicast MAC address of the remote MEP.
Total number of synthetic loss message (SLM) PDU frames sent from the source
MEP to the remote MEP during this ETH-SLM session.
Total number of synthetic loss message (SLM) PDU frames that the remote
MEP received from the source MEP during this ETH-SLM session.
Total number of synthetic loss reply (SLR) PDU frames that the remote MEP
sent to the source MEP during this measurement session.
Total number of synthetic loss reply (SLR) PDU frames that the source MEP
received from the remote MEP during this measurement session.
Number of synthetic frames transmitted to the peer MEP for a test ID. A test ID
is used to distinguish each synthetic loss measurement because multiple
measurements can be simultaneously activated also on a given CoS and MEP
pair. It must be unique at least within the context of any SLM for the MEG and
initiating MEP.
Number of synthetic frames received from the peer MEP for a test ID. The MEP
generates a unique Test ID for the session, adds the source MEP ID, and initializes
the local counters for the session before SLM initiation. For each SLM PDU
transmitted for the session (test ID), the local counter TxFC1 is sent in the packet.
Value of the local counter TxFCl at the time of SLM frame transmission.
Value of the local counter RxFCl at the time of SLR frame transmission.
Count of frame loss associated with ingress data frames.
Count of frame loss associated with egress data frames.
option).
remote-mep
Copyright © 2017, Juniper Networks, Inc.