Juniper ACX1000 Configuration Manual page 2789

Copyright © 2017, Juniper Networks, Inc.
Table 168: show lldp Output Fields (continued)
Field Name Field Description
Port Description Following value used for port description TLV:
TLV type
interface-alias (ifAlias)
generate the port description TLV.
interface-description (ifDescr)
used to generate the port description TLV.
For more information about port description TLV type, see port-description-type.
Interface Name of the interface for which LLDP configuration information is being reported
For information about interface names, see Interface Naming Overview. For
information about interface names for TX Matrix routers, see TX Matrix Router
Chassis and Interface Names. For information about FPC numbering on TX Matrix
routers, see Routing Matrix with a TX Matrix Router FPC Numbering.
Name of the aggregated Ethernet interface, if any, to which the interface belongs.
Parent Interface
LLDP operating state. The state can be Enabled or Disabled.
LLDP
LLDP-MED operating state. The state can be Enabled or Disabled.
LLDP-MED
LLDP power negotiation operating state. The state can be Enabled or Disabled.
Power Negotiation
List of basic LLDP TLVs supported by this device (
LLDP basic TLVs
supported
List of IEEE 802.1 LLDP TLVs supported by this device (
LLDP 802 TLVs
supported
Chapter 42: Operational Commands
—Indicates that the ifAlias MIB object value is used to
—Indicates that the ifDescr MIB object value is
detail
only).
only).
detail
2731