Show Validation Replication Database - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show validation replication database

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
3186
show validation replication database
<brief | detail>
<instance instance-name>
<logical-system logical-system-name>
<origin-autonomous-system as-number>
<record ip-prefix>
<session ip-address>
Command introduced in Junos OS Release 12.2.
Display the state of the nonstop active routing (NSR) records. The output is the same
as the output of the
show validation database
none—Display all route validation database entries.
brief | detail—(Optional) Display the specified level of output.
instance instance-name—(Optional) Display information about route validation database
entries for the specified routing instance. The instance name can be master for the
main instance, or any valid configured instance name or its prefix.
logical-system logical-system-name—(Optional) Perform this operation on a particular
logical system.
origin-autonomous-system as-number—(Optional) Filter the output by mismatched
origin autonomous systems. The
origin-autonomous-system information between resource public key infrastructure
(RPKI) caches. Mismatches might occur during cache reconfiguration.
record ip-prefix—(Optional) Filter the output by route validation records that match a
given prefix.
session ip-address—(Optional) Filter the output by a specific RPKI cache session.
view
Use Case and Benefit of Origin Validation
Understanding Origin Validation for BGP
Example: Configuring Origin Validation for BGP
show validation replication database on page 3187
command, except for the
mismatch qualifier is useful for finding conflicting
Copyright © 2017, Juniper Networks, Inc.
column.
Mismatch