show (ospf | ospf3) route
List of Syntax
Syntax
Syntax (EX Series
Switch and QFX
Series)
Release Information
Description
Options
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2857
Syntax (EX Series Switch and QFX Series) on page 2857
show (ospf | ospf3) route
<brief | detail | extensive>
<abr | asbr | extern | inter | intra>
<destination>
<instance (default | ipv4-multicast | instance-name)>
<logical-system (default | ipv4-multicast | logical-system-name)>
<network>
<no-backup-coverage>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
<router>
<topology (default | ipv4-multicast | topology-name)>
<transit>
show (ospf | ospf3) route
<brief | detail | extensive>
<abr | asbr | extern | inter | intra>
<destination>
<instance instance-name
<network>
<no-backup-coverage>
<router>
<topology (default | ipv4-multicast | topology-name)>
<transit>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.0.
topology
option introduced in Junos OS Release 9.2.
realm
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display the entries in the Open Shortest Path First (OSPF) routing table.
none—Display standard information about all entries in the OSPF routing table for all
routing instances and all topologies.
destination—Display routes to the specified IP address (with optional destination prefix
length).
brief | detail | extensive—(Optional) Display the specified level of output.
abr—(Optional) Display routes to area border routers.
asbr—(Optional) Display routes to autonomous system border routers.
extern—(Optional) Display external routes.
Chapter 42: Operational Commands
2857