Show Oam Ethernet Connectivity-Fault-Management Server-Mep - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show oam ethernet connectivity-fault-management server-mep

Syntax
Release Information
Description
Options
Required Privilege
Level
Output Fields
Table 183: show oam ethernet connectivity-fault-management server-mep Output Fields
Field Name Field Description
MEP identifier Identifier of the server MEP and the status <Up/Down>..
Protocol Protocols information (l2circuit/l2vpn/ethernet)
Interface name Interface name, interface status and link status information.
Ethernet-ais status ETH-AIS status, interval, domain level, and priority information.
Action profile Name of the action profile.
Sample Output
show oam ethernet connectivity-fault-management server-mep
2810
show oam ethernet connectivity-fault-management server-mep
<server-mep-id>
<brief | detail | extensive>
Command introduced in Junos OS Release 12.3X53 for ACX Series routers.
On the ACX Series routers, display the server maintenance association end points (MEPs)
created in the system.
brief | detail | extensive—(Optional) Specified level of output.
server-mep-id—Information of a server MEP.
View
Table 183 on page 2810 lists the output fields for the
connectivity-fault-management server-mep
approximate order in which they appear.
user@host> show oam ethernet connectivity-fault-management server-mep 1000
MEP identifier: 1000, Status: up
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: down, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
show oam ethernet
command. Output fields are listed in the
Copyright © 2017, Juniper Networks, Inc.