Show Route Inactive-Path - Juniper ACX1000 Configuration Manual

show route inactive-path

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
show route inactive-path
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 3065
Syntax (EX Series Switches) on page 3065
show route inactive-path
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route inactive-path
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display routes for destinations that have no active route. An inactive route is a route that
was not selected as the best path.
none—Display all inactive routes.
brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route active-path on page 2972
show route inactive-path on page 3065
show route inactive-path detail on page 3066
show route inactive-path extensive on page 3067
show route inactive-path terse on page 3067
For information about output fields, see the output field tables for the
command, the
show route detail
show route terse command.
user@host> show route inactive-path
inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden)
Chapter 42: Operational Commands
command, the
show route extensive
.
brief
show route
command, or the
3065