Juniper ACX1000 Configuration Manual page 2761

Output Fields
Sample Output
show isis route logical-system
show isis route floodgroup
Copyright © 2017, Juniper Networks, Inc.
Table 160 on page 2703 describes the output fields for the
fields are listed in the approximate order in which they appear.
Table 160: show isis route Output Fields
Field Name
Current version
L1
L2
Prefix or Label
L
Version
Metric
Type
Interface
Via
ISO Routes
snpa
user@host> show isis route logical-system ls1
IS-IS routing table
Prefix L Version Metric Type Interface
10.9.7.0/30 2
10.9.201.1/32 2
IPV6 Unicast IS-IS routing table
Prefix L Version Metric Type Interface
8009:3::a09:3200/126 2
user@R2> show isis route floodgroup 49.0001
IS-IS routing table
IPv4/IPv6 Routes
Field Description
Number of the current version of the IS-IS routing table.
Version of Level 1 SPF that was run.
Version of Level 2 SPF that was run.
Destination of the route.
IS-IS level:
1 —Level 1 only
2 —Level 2 only
—Level 1 and Level 2
3
Version of SPF that generated the route.
Metric value associated with the route.
Metric type: (internal) or
int ext
Interface to the next hop.
System identifier of the next hop, displayed as a name if possible.
ISO routing table entries.
MAC address.
Current version: L1: 8 L2: 11
11 20 int gr-0/2/0.0
11 60 int gr-0/2/0.0
Current version: L1: 9 L2: 11
11 20 int gr-0/2/0.0
Current version: L1: 14 L2: 27
Chapter 42: Operational Commands
command. Output
show isis route
(external).
Via
h
h
Via
h
2703