Juniper ACX1000 Configuration Manual page 3226

ACX Series Universal Access Router Configuration Guide
Table 232: show services rpm rfc2544-benchmarking test-id Output Fields (continued)
Field Name Field Description
Rfc2544 (ACX Series routers only) Details of the frame-loss test.
frame-loss test
information :
Length of the first burst when test frames are sent, as a measure of number of
Initial burst length:
seconds at the rate of Kbps.
Test iteration mode Mode of the test iteration: Binary or step-down.
:
Test iteration step The test step percentage for tests. If not specified, the default step-percent is
10 percent. This parameter is ignored for all type of tests other than frame-loss
percent
tests.
The theoretical limit of the media for the frame size configured for the test. This
Theoretical max
value is typically set to the bandwidth of the server being tested.
bandwidth
Size of the test packets in bytes.
Test packet size
Number of the test iteration.
Iteration
Period, in seconds, for which the test iteration is run.
Duration (sec)
The offered throughput in percentage of the chosen service (such as Layer 3 or
Offered throughput
Ethernet pseudowire)
(percentage)
Amount of time that has passed, in seconds, since the start of the test.
Elapsed time
Theoretical frame rate in packets-per-second.
pps
Number of transmitted test packets.
Tx Packets
Number of received test packets.
Rx Packets
Number of transmitted bytes.
Tx Bytes
Number of received bytes.
Rx Bytes
Percentage of frames that must been forwarded by the router under steady
Frame-loss rate %
state (constant) load, but were not forwarded due to lack of resources.
Results of the frame-loss test completed for a certain packet size.
Result of the
iteration runs :
Frame-loss rate Percentage of dropped frames for the specified packet size
(percent) :
RFC2544 Consolidated statistics of the frame-loss test
Frame-loss test
results summary
3168
Level of Output
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
Copyright © 2017, Juniper Networks, Inc.