Juniper ACX1000 Configuration Manual page 3105

Required Privilege
Level
List of Sample Output
Copyright © 2017, Juniper Networks, Inc.
display information for the specified router (line-card chassis) connected to the TX
Matrix Plus router.
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
learning-vlan-id learning-vlan-id—(MX Series routers only) (Optional) Display learned
information for all VLANs or for the specified VLAN.
matching matching—(Optional) Display routing table entries matching the specified
prefix or prefix length.
multicast—(Optional) Display routing table entries for multicast routes.
table —(Optional) Display route entries for all the routing tables in the main routing
instance or for the specified routing instance. If your device supports logical systems,
you can also display route entries for the specified logical system and routing instance.
To view the routing instances on your device, use the
vlan (all | vlan-name)—(Optional) Display information for all VLANs or for the specified
VLAN.
vpn vpn—(Optional) Display routing table entries for a specified VPN.
view
show route forwarding-table on page 3052
show route forwarding-table detail on page 3053
show route forwarding-table destination extensive (Weights and Balances) on page 3053
show route forwarding-table extensive on page 3054
show route forwarding-table extensive (RPF) on page 3055
show route forwarding-table family mpls on page 3056
show route forwarding-table family mpls ccc ge-0/0/1.1004 on page 3056
show route forwarding-table family vpls on page 3056
show route forwarding-table vpls (Broadcast, unknown unicast, and multicast (BUM)
hashing is enabled) on page 3057
show route forwarding-table vpls (Broadcast, unknown unicast, and multicast (BUM)
hashing is enabled with MAC Statistics) on page 3057
show route forwarding-table family vpls extensive on page 3057
show route forwarding-table table default on page 3059
Chapter 42: Operational Commands
show route instance command.
3047