Show L2-Learning Global-Information - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show l2-learning global-information

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Sample Output
show l2-learning global-information
2714
show l2-learning global-information
Command introduced in Junos OS Release 8.4.
(MX Series routers only) Display Layer 2 learning process-related information for the
entire router.
This command has no options.
view
show l2-learning global-information on page 2714
Table 163 on page 2714 describes the output fields for the
command. Output fields are listed in the approximate order in which
global-information
they appear.
Table 163: show l2-learning global-information Output Fields
Field Name Field Description
Configured timeout interval, in seconds, for all MAC table entries.
MAC aging
interval
Status of MAC learning:
MAC learning
Status of MAC accounting:
MAC statistics
Configured maximum limit on the number of MAC addresses that can be
MAC limit Count
learned.
MAC limit hit flag Status of the learned MAC limit hit flag:
the global MAC limit) or
global MAC limit).
Status of action to drop packets after the configured MAC address limit is
MAC packet
reached:
action drop
user@host> show l2-learning global-information
Global Configuration:
MAC aging interval : 300
MAC learning : Enabled
or
Enabled Disabled
or
Enabled
Disabled (the learned MAC does not exceed the
(packets are dropped) or
Enabled
show l2-learning
.
.
Disabled
Enabled (the learned MAC exceeds
(packets are forwarded).
Disabled
Copyright © 2017, Juniper Networks, Inc.