Show Ptp Statistics - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show ptp statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 212: show ptp statistics Output Fields
Field Name
Local Address
Remote Address
Role
Stream
Received
Transmitted
2948
show ptp statistics
<brief | detail>
Command introduced in Junos OS Release 12.3.
Command introduced in Junos OS Release 17.3 for the QFX Series.
Display information about Precision Time Protocol (PTP) statistics.
brief—Display brief statistics about the operation of configured PTP clocks.
detail—Display detailed statistics about the operation of configured PTP clocks.
view
IEEE 1588v2 PTP Boundary Clock Overview on page 234
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
show ptp statistics on page 2949
show ptp statistics (with IPv6 addresses for PTP master/slave) on page 2949
show ptp statistics detail on page 2949
show ptp statistics detail (with IPv6 addresses for PTP master/slave) on page 2950
Table 212 on page 2948 lists the output fields for the
fields are listed in the approximate order in which they appear.
Field Description
IP address of the local PTP master and slave interfaces.
IP address of the remote PTP master and slave interfaces.
Function performed by an Ethernet interface configured as a slave or master.
Stream ID uniquely identifies the connection between one master and one slave.
1588v2 packets received by the master or slave interface.
1588v2 packets transmitted by the master or slave interface.
show ptp statistics command. Output
Copyright © 2017, Juniper Networks, Inc.