Show Route Instance - Juniper ACX1000 Configuration Manual

show route instance

List of Syntax
Syntax
Syntax (EX Series
Switches and QFX
Series)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 3071
Syntax (EX Series Switches and QFX Series) on page 3071
show route instance
<brief | detail | summary>
<instance-name>
<logical-system (all | logical-system-name)>
<operational>
show route instance
<brief | detail | summary>
<instance-name>
<operational>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display routing instance information.
none—(Same as ) Display standard information about all routing instances.
brief
brief | detail | summary—(Optional) Display the specified level of output. If you do not
specify a level of output, the system defaults to
with the keyword.)
operational
instance-name—(Optional) Display information for all routing instances whose name
begins with this string (for example,
you run the
show route instance cust1
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
operational—(Optional) Display operational routing instances.
view
Example: Transporting IPv6 Traffic Across IPv4 Using Filter-Based Tunneling
Example: Configuring the Helper Capability Mode for OSPFv3 Graceful Restart
show route instance on page 3073
show route instance detail (Graceful Restart Complete) on page 3073
show route instance detail (Graceful Restart Incomplete) on page 3075
Chapter 42: Operational Commands
. (These options are not available
brief
cust1 , cust11 , and cust111 are all displayed when
command).
3071