Juniper ACX1000 Configuration Manual page 3182

ACX Series Universal Access Router Configuration Guide
3124
Table 228: State Output Field Values (continued)
Value
Ext
FlashAll
Hidden
IfCheck
IGP metric
Inactive reason
Initial
Int
Int Ext
Interior > Exterior > Exterior via
Interior
Local Preference
Martian
MartianOK
Next hop address
No difference
NoReadvrt
NotBest
Not Best in its group
NotInstall
Number of gateways
Origin
Description
BGP route received from an external BGP neighbor.
Forces all protocols to be notified of a change to any route,
active or inactive, for a prefix. When not set, protocols are
informed of a prefix only when the active route changes.
Route not used because of routing policy.
Route needs forwarding RPF check.
Path through next hop with lower IGP metric is available.
Flags for this route, which was not selected as best for a
particular destination.
Route being added.
Interior route.
BGP route received from an internal BGP peer or a BGP
confederation peer.
Direct, static, IGP, or EBGP path is available.
Path with a higher local preference value is available.
Route is a martian (ignored because it is obviously invalid).
Route exempt from martian filtering.
Path with lower metric next hop is available.
Path from neighbor with lower IP address is available.
Route not to be advertised.
Route not chosen because it does not have the lowest MED.
Incoming BGP AS is not the best of a group (only one AS can
be the best).
Route not to be installed in the forwarding table.
Path with a greater number of next hops is available.
Path with a lower origin code is available.
Copyright © 2017, Juniper Networks, Inc.