Juniper ACX1000 Configuration Manual page 3177

Table 226: show route table Output Fields (continued)
Field Name Field Description
Label operation MPLS label and operation occurring at this routing device. The operation can be
is removed from the top of the stack),
(where a label is replaced by another label).
Interface (Local only) Local interface name.
Protocol next hop Network layer address of the remote routing device that advertised the prefix. This address is used
to derive a forwarding next hop.
Indirect next hop Index designation used to specify the mapping between protocol next hops, tags, kernel export policy,
and the forwarding next hops.
State State of the route (a route can be in more than one state). See
Local AS AS number of the local routing devices.
Age How long the route has been known.
AIGP Accumulated interior gateway protocol (AIGP) BGP attribute.
Metricn Cost value of the indicated route. For routes within an AS, the cost is determined by IGP and the
individual protocol metrics. For external routes, destinations, or routing domains, the cost is determined
by a preference value.
MED-plus-IGP Metric value for BGP path selection to which the IGP cost to the next-hop destination has been added.
TTL-Action For MPLS LSPs, state of the TTL propagation attribute. Can be enabled or disabled for all
RSVP-signaled and LDP-signaled LSPs or for specific VRF routing instances.
Task Name of the protocol that has added the route.
Announcement bits The number of BGP peers or protocols to which Junos OS has announced this route, followed by the
list of the recipients of the announcement. Junos OS can also announce the route to the kernel routing
table (KRT) for installing the route into the Packet Forwarding Engine, to a resolve tree, a Layer 2 VC,
or even a VPN. For example,
for next hops found in the routing table.
Copyright © 2017, Juniper Networks, Inc.
n-Resolve inet
—An index used by Juniper Networks customer support only.
n
(where another label is added to the label stack), or
push
Table 218 on page
indicates that the specified route is used for route resolution
Chapter 42: Operational Commands
(where a label
pop
swap
3008.
3119