Juniper ACX1000 Configuration Manual page 2917

Table 191: show (ospf | ospf3) route Output Fields (continued)
Field Name Field Description
How the route was learned:
Path type
Inter
Ext1
Ext2
Intra
The type of routing device from which the route was learned:
Route type
AS BR
Area BR
Area/AS BR
Network
Router
Transit
LAN, or nonbroadcast multiaccess (NBMA) link.
Discard
Next-hop type:
NH Type
Route's metric value.
Metric
(OSPFv3 only) Interface through which the route's next hop is reachable.
NH-interface
NH-addr (OSPFv3 only) IPv6 address of the next hop.
NextHop Interface (OSPFv2 only) Interface through which the route's next hop is reachable.
Nexthop addr/label (OSPFv2 only) If the
NH Type
Area Area ID of the route.
Origin Router from which the route was learned.
Type 7 Route was learned through a not-so-stubby area (NSSA) link-state
advertisement (LSA).
Route was learned through NSSA LSA and the propagate bit was set.
P-bit
Forwarding address is nonzero.
Fwd NZ
through an NSSA LSA.
Copyright © 2017, Juniper Networks, Inc.
—Interarea route
—External type 1 route
—External type 2 route
—Intra-area route
—Route to AS border router.
—Route to area border router.
—Route to router that is both an
—Network router.
—Route to a router that is neither an
—(OSPFv3 only) Route to a pseudonode representing a transit network,
—Route to a summary discard.
or .
LSP IP
NH Type is IP , then it is the address of the next hop. If the
is , then it is the name of the label-switched path.
LSP
Fwd NZ
Area BR and AS BR .
nor an .
Area BR AS BR
is only displayed if the route is learned
Chapter 42: Operational Commands
Output Level
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
detail
detail
detail
detail
detail
2859