Show Route Flow Validation - Juniper ACX1000 Configuration Manual

show route flow validation

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 222: show route flow validation Output Fields
Field Name Field Description
routing-table-name Name of the routing table (for example, inet.0).
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 3043
Syntax (EX Series Switches) on page 3043
show route flow validation
<brief | detail>
<ip-prefix>
<table table-name>
<logical-system (all | logical-system-name)>
show route flow validation
<brief | detail>
<ip-prefix>
<table table-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display flow route information.
none—Display flow route information.
brief | detail—(Optional) Display the specified level of output. If you do not specify a
level of output, the system defaults to brief.
ip-prefix—(Optional) IP address for the flow route.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
table table-name—(Optional) Display flow route information for all routing tables whose
name begins with this string (for example, inet.0 and inet6.0 are both displayed
when you run the show route flow validation inet
view
show route flow validation on page 3044
show route flow validation (IPv6) on page 3044
Table 222 on page 3043 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 42: Operational Commands
command).
command.
show route flow validation
Level of Output
All levels
3043