Juniper ACX1000 Configuration Manual page 2754

ACX Series Universal Access Router Configuration Guide
Table 158: show isis interface Output Fields (continued)
Field Name Field Description
Configured value of the hold timer.
config holdtime
If the state is not in sync and the hold time is not infinity, then this field displays
remaining
the remaining hold time in seconds.
IIH max size Configured value of IS-IS hello packets
Sample Output
show isis interface
show isis interface brief
show isis interface detail
show isis interface extensive
2696
user@host> show isis interface
IS-IS interface database:
Interface L CirID Level 1 DR
at-2/3/0.0 3
lo0.0 3
The output for the show isis interface brief
command. For sample output, see
interface
user@host> show isis interface detail
IS-IS interface database:
at-2/3/0.0
Index: 66, State: 0x6, Circuit id: 0x1, Circuit type: 3
LSP interval: 100 ms, CSNP interval: 5 s
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 1
2 1
lo0.0
Index: 64, State: 0x6, Circuit id: 0x1, Circuit type: 0
LSP interval: 100 ms, CSNP interval: disabled
Adjacency advertisement: Advertise
Protection Type: Node Link, No eligible Backup
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 0
2 0
user@host> show isis interface extensive
IS-IS interface database:
xe-6/1/0.0
Index: 75, State: 0x6, Circuit id: 0x1, Circuit type: 2
LSP interval: 100 ms, CSNP interval: 10 s, Loose Hello padding, IIH max size:
1505
Adjacency advertisement: Advertise
Flood-group Area-ID: 49.0001
Level 2 DR
0x1 Point to Point Point to Point
0x1 Passive Passive
command is identical to that for the
show isis interface on page
64 10 9.000
64 10 9.000
64 0 Passive
64 0 Passive
Level of Output
extensive
extensive
extensive
L1/L2 Metric
10/10
0/0
show isis
2696.
27
27
Copyright © 2017, Juniper Networks, Inc.