Juniper ACX1000 Configuration Manual page 3213

Table 230: show route terse Output Fields (continued)
Field Name Field Description
Metric 1 First metric value in the route. For routes learned from BGP, this is the MED metric.
Metric 2 Second metric value in the route. For routes learned from BGP, this is the IGP metric.
Next hop Next hop to the destination. An angle bracket (>) indicates that the route is the selected route.
AS path AS path through which the route was learned. The letters at the end of the AS path indicate the path
origin, providing an indication of the state of the route at the point at which the AS path originated:
Sample Output
show route terse
Copyright © 2017, Juniper Networks, Inc.
—IGP.
I
—EGP.
E
? —Incomplete; typically, the AS path was aggregated.
user@host> show route terse
inet.0: 10 destinations, 12 routes (10 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
A V Destination P Prf
* ? 172.16.1.1/32
? B 170
unverified
* ? 172.16.1.1/32
* V 2.2.0.2/32 B 170
valid
* ? 10.0.0.0/30 D
? B 170
unverified
* ? 10.0.0.1/32 L
* ? 10.0.0.4/30 B 170
unverified
* ? 10.0.0.8/30 B 170
unverified
* I 172.16.1.1/32 B 170
invalid
* N 192.168.2.3/32 B 170
unknown
* ? 172.16.233.5/32
Metric 1 Metric 2
O 10 1
100
D 0
110
0
100
0
100
100
90
100
O 10 1
Chapter 42: Operational Commands
Next hop AS path
>10.0.0.2
I
>10.0.0.2
>lo0.2
200 I
>10.0.0.2
>lt-1/2/0.1
I
>10.0.0.2
Local
I
>10.0.0.2
I
>10.0.0.2
200 I
>10.0.0.2
200 I
>10.0.0.2
MultiRecv
3155