Show Route Damping - Juniper ACX1000 Configuration Manual

show route damping

List of Syntax
Syntax
Syntax (EX Series
Switch and QFX
Series)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2995
Syntax (EX Series Switch and QFX Series) on page 2995
show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display the BGP routes for which updates might have been reduced because of route
flap damping.
brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to brief.
decayed—Display route damping entries that might no longer be valid, but are not
suppressed.
history—Display entries that have already been withdrawn, but have been logged.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
suppressed—Display entries that have been suppressed and are no longer being installed
into the forwarding table or exported by routing protocols.
view
clear bgp damping
show policy damping
show route damping decayed detail on page 2998
show route damping history on page 2999
show route damping history detail on page 2999
Table 215 on page 2996 lists the output fields for the
fields are listed in the approximate order in which they appear.
Chapter 42: Operational Commands
command. Output
show route damping
2995