Juniper ACX1000 Configuration Manual page 2827

Output Fields
Table 178: show oam ethernet connectivity-fault-management interfaces Output Fields
Field Name Field Description
Interface identifier.
Interface
Local interface status.
Interface status
Local link status.
Link status
Maintenance domain name.
Maintenance
domain name
Maintenance domain name format configured.
Format
(Maintenance
domain)
Maintenance domain level configured.
Level
Maintenance association name.
Maintenance
association name
Maintenance association name format configured.
Format
(Maintenance
association)
Continuity-check status.
Continuity-check
status
Ethernet-ais status Status of alarm indication signal (AIS).
Interval Continuity-check message interval.
Lost continuity-check message threshold.
Loss-threshold
Status of the interface status TLV, if configured on the MEP interface:
Interface status
TLV down ,
Port status TLV Status of the port status TLV, if configured on the MEP interface:
Copyright © 2017, Juniper Networks, Inc.
show oam ethernet connectivity-fault-management interfaces detail(Connection
Protection TLV Configured) on page 2775
show oam ethernet connectivity-fault-management interfacesextensive on page 2776
show oam ethernet connectivity-fault-management interfaces level on page 2777
show oam ethernet connectivity-fault-management interfaces (trunk ports) on page 2777
Table 178 on page 2769 lists the output fields for the
connectivity-fault-management interfaces
approximate order in which they appear.
, , or
Up down oam-down
testing , unknown , dormant , notPresent
show oam ethernet
command. Output fields are listed in the
.
active or in-active .
, lowerLayerDown
none
Chapter 42: Operational Commands
Level of Output
All levels
All levels
All levels
detail extensive
detail extensive
All levels
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
, ,
none up detail extensive
, no , yes detail extensive
2769