Table of Contents
Advertisement
CHAPTER 1
Overview
JRR200 Route Reflector Overview
JRR200 Route Reflector System Overview
JRR200 Route Reflector Field-Replaceable Units
Copyright © 2018, Juniper Networks, Inc.
JRR200 Route Reflector Overview on page 17
JRR200 Chassis on page 18
JRR200 Route Reflector Cooling System on page 21
JRR200 Power System on page 22
JRR200 Route Reflector System Overview on page 17
JRR200 Route Reflector Field-Replaceable Units on page 17
The Juniper Networks JRR200 Route Reflector is a 1U form factor appliance with a
multicore x86 CPU and preinstalled vRR software that can host one route reflector
instance. The JRR200 route reflector is suitable for large enterprises, data centers and
service providers for hosting vRR software to scale up to 30 million routing information
base (RIB) entries.
The JRR200 route reflector comes with eight 1/10 Gigabit Ethernet SFP+ ports, 64 GB of
DDR4 memory, and two 240-GB solid-state drives (SSDs) in a RAID1 configuration. The
JRR200 route reflector is available in both AC and DC models which support Zero Touch
Provisioning mode (ZTP) to ensure seamless insertion into the network and provide
operational simplicity.
JRR200 Route Reflector (AC) — JRR200 Route Reflector with dual redundant AC
power supplies
JRR200 Route Reflector (DC) — JRR200 Route Reflector with dual redundant DC
power supplies
Field-replaceable units (FRUs) are components that you can replace at your site. The
FRUs on the JRR200 route reflector can be removed and replaced without powering off
the route reflector. The JRR200 route reflector supports the following FRUs:
AC power supply units
17
Advertisement
Table of Contents
Troubleshooting
