Show System Storage Partitions (Acx Series) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show system storage partitions (ACX Series)

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 234: show system storage partitions Output Fields
Field Name
Boot Media
Active Partition
Backup Partition
Currently booted from
3180
show system storage partitions
Command introduced in Junos OS Release 16.1R2 for ACX Series routers.
Display information about the disk partitions on ACX Series routers.
view
Routing Engines and Storage Media Names (ACX Series, M Series, MX Series, PTX
Series, T Series, TX Matrix, TX Matrix Plus, and JCS 1200 Routers) on page 45
Boot Sequence on ACX Series Routers on page 48
Dual-Root Partitioning ACX Series Routers Overview on page 48
Understanding How the Primary Junos OS Image with Dual-Root Partitioning Recovers
on the ACX Series Router on page 49
Junos OS Release 12.2 or Later Upgrades with Dual-Root Partitioning on ACX Series
Routers on page 51
Installing Junos OS Using a USB Storage Device on ACX Series Routers on page 52
Installing Junos OS Upgrades from a Remote Server on ACX Series Routers on page 52
Example: Installing Junos OS and Configuring a Dual-Root Partition on ACX Series
Routers Using the CLI on page 53
show system storage partitions on page 3181
Table 234 on page 3180 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Field Description
Media (internal or external) from which the switch was booted.
Name of the active root partition.
Name of the backup (alternate) root partition.
Partition from which the switch was last booted.
show system storage partitions
Copyright © 2017, Juniper Networks, Inc.