Show Poe Telemetries Interface (Acx2000 Routers) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show poe telemetries interface (ACX2000 Routers)

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
2896
show poe telemetries interface interface-name (entries | all)
Command introduced in Junos OS Release 12.2 for ACX2000 Series Universal Access
Routers.
Display the history of power consumption on the specified interface.
Telemetries must be enabled on the interface before you can display the history of power
consumption.
—Display power consumption records for the specified PoE
interface interface-name
interface.
(entries | all) —Specify the number of power consumption records to display. The most
recent records are displayed.
view
show poe interface
show poe controller on page 2893
Troubleshooting PoE Interfaces
show poe telemetries interface ge-0/1/7 all on page 2897
show poe telemetries interface ge-0/1/7 2 on page 2897
Table 198 on page 2896 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Table 198: show poe telemetries interface Output Fields
Field Name Field Description
Interface Name of the interface.
S1 No Number of the record for the specified interface. Record number 1 is the most
recent.
Date and time when the power-consumption data was gathered.
Timestamp
Amount of power provided by the specified interface at the time the data was
Power
gathered.
Voltage Maximum voltage provided by the specified interface at the time the data was
gathered.
show poe telemetries interface
Copyright © 2017, Juniper Networks, Inc.