Juniper ACX1000 Configuration Manual page 2753

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Table 158: show isis interface Output Fields (continued)
Field Name
Field Description
Level 1 designated intermediate system.
Level 1 DR
Level 2 designated intermediate system.
Level 2 DR
Interface's metric for Level 1 and Level 2. If there is no information, the metric
L1/L2 Metric
is
.
0
Flood-group is configured on a specific IS-IS interface
Flood-group
Area-ID
NOTE:
Adjacency
This routing device has signaled to advertise this interface to its neighbors in
their label-switched paths (LSPs).
advertisement:
Advertise
Adjacency
This neighbor has signaled not to advertise this interface in the routing device's
outbound LSPs.
advertisement:
Suppress
Number of adjacencies established on this interface.
Adjacencies
Priority value for this interface.
Priority
Metric value for this interface.
Metric
/
Interface's hello interval.
Hello(s)
Hello
Interval
/
Interface's hold time.
Hold(s)
Hold Time
Router responsible for sending network link-state advertisements, which describe
Designated Router
all the routing devices attached to the network.
Hello padding
Type of hello padding:
Adaptive
the initial detection of a new neighbor until the neighbor verifies the adjacency
as Up in the adjacency state TLV. If the neighbor does not support the
adjacency state TLV, then padding continues. On LAN connections, padding
starts from the initial detection of a new neighbor until there is at least one
active adjacency on the interface.
Loose
new neighbor until the adjacency transitions to the Up state.
Strict
states, and is continuous.
LDP sync state
Current LDP synchronization state:
reason
Reason for being in the LDP sync state.
Copyright © 2017, Juniper Networks, Inc.
Seen only when Flood-group is configured.
—On point-to-point connections, the hello packets are padded from
—(Default) The hello packet is padded from the initial detection of a
—Padding is performed on all interface types and for all adjacency
in sync
,
in holddown
, or
not supported
Chapter 42: Operational Commands
Level of Output
none
brief
none
brief
none
brief
detail extensive
detail extensive
detail extensive
detail
detail
detail
detail extensive
detail extensive
detail
extensive
.
extensive
extensive
2695

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents