Juniper ACX1000 Configuration Manual page 3121

show route hidden detail
show route hidden extensive
show route hidden terse
Copyright © 2017, Juniper Networks, Inc.
Unusable
10.12.1.0/24 [BGP/170] 03:44:10, localpref 100, from 10.4.4.4
AS path: 100 I
Unusable
10.12.80.4/30 [BGP/170] 03:44:10, localpref 100, from 10.4.4.4
AS path: I
Unusable
...
user@host> show route hidden detail
inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden)
Restart Complete
127.0.0.1/32 (1 entry, 0 announced)
Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 1
Next hop: via lo0.0, selected
State: <Hidden Martian Int>
Local AS:
Age: 4:27:37
Task: IF
AS path: I
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
red.inet.0: 6 destinations, 8 routes (4 active, 0 holddown, 3 hidden)
Restart Complete
10.5.5.5/32 (1 entry, 0 announced)
BGP Preference: 170/-101
Route Distinguisher: 10.4.4.4:4
Next hop type: Unusable
Next-hop reference count: 6
State: <Secondary Hidden Int Ext>
Local AS:
Age: 3:45:09
Task: BGP_1.10.4.4.4+2493
AS path: 100 I
Communities: target:1:999
VPN Label: 100064
Localpref: 100
Router ID: 10.4.4.4
Primary Routing Table bgp.l3vpn.0
...
The output for the show route hidden extensive
command. For sample output, see
route hidden detail
page 3063.
user@host> show route hidden terse
Chapter 42: Operational Commands
1
1 Peer AS: 1
command is identical to that of the
show route hidden detail on
show
3063