Juniper ACX1000 Configuration Manual page 2979

Sample Output
show protection-group ethernet-ring interface (EX Series Switch Owner Node)
show protection-group ethernet-ring interface (Owner Node MX Series Router )
show protection-group ethernet-ring interface detail (Owner Node MX Series Router )
Copyright © 2017, Juniper Networks, Inc.
Table 203: MX Series Routers show protection-group ethernet-ring
interface Output Fields (continued)
Field Name
Control Channel
Direction
Forward State
Ring Protection Link End
Signal Failure
Admin State
user@host> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg101
Interface Forward State
ge-0/0/3.0 discarding
ge-0/0/9.0 forwarding
user@host> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg101
Interface Control Channel
ge-1/2/0 ge-1/2/0.100
ge-1/2/2 ge-1/2/2.100
user@host> show protection-group ethernet-ring interface detail
Ethernet ring port parameters for protection group pg101
Interface name
Control channel name
Interface direction
Ring Protection Link End
Signal Failure
Forward State
Interface Admin State
Interface name
Field Description
(MX Series router only) Logical unit configured on the physical
interface.
Direction of the traffic.
State of the ring forwarding on the interface:
.
forwarding
Whether this interface is the end of the ring:
Whether there a signal failure exists on the link:
State of the interface: For EX switches,
. For MX routers,
waiting IFF ready
RPL End Signal Failure
Yes Clear
No Clear
Direction Forward State
east forwarding
west forwarding
: ge-1/2/0
: ge-1/2/0.100
: east
: No
: Clear
: forwarding
: IFF ready
: ge-1/2/2
Chapter 42: Operational Commands
or
discarding
or .
Yes No
or
Clear Set
, , or
ready ifl ready
or .
IFF disabled
Admin State
ready
ready
RPL End SF Admin State
No Clear IFF ready
No Clear IFF ready
.
2921