Show Route No-Community - Juniper ACX1000 Configuration Manual

show route no-community

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Sample Output
show route no-community
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 3085
Syntax (EX Series Switches) on page 3085
show route no-community
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route no-community
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the route entries in each routing table that are not associated with any community.
none—(Same as brief ) Display the route entries in each routing table that are not
associated with any community.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route no-community on page 3085
show route no-community detail on page 3086
show route no-community extensive on page 3086
show route no-community terse on page 3087
For information about output fields, see the output field tables for the
command, the show route detail
the show route terse command.
user@host> show route no-community
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
10.10.0.0/16 *[Static/5] 00:36:27
> to 192.168.71.254 via fxp0.0
10.209.0.0/16 *[Static/5] 00:36:27
> to 192.168.71.254 via fxp0.0
10.255.71.52/32 *[Direct/0] 00:36:27
Chapter 42: Operational Commands
command, the show route extensive
show route
command, or
3085