Show Validation Statistics - Juniper ACX1000 Configuration Manual

show validation statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 239: show validation statistics Output Fields
Field Name
Total RV records
Total Replication RV records
Prefix entries
Origin-AS entries
Copyright © 2017, Juniper Networks, Inc.
show validation statistics
<instance instance-name>
<logical-system logical-system-name>
Command introduced in Junos OS Release 12.2.
Display route validation statistics.
none—Display statistics for all routing instances.
instance instance-name—(Optional) Display information for the specified routing
instance. The instance name can be master for the main instance, or any valid
configured instance name or its prefix.
logical-system logical-system-name—(Optional) Perform this operation on a particular
logical system.
view
Use Case and Benefit of Origin Validation
Understanding Origin Validation for BGP
Example: Configuring Origin Validation for BGP
show validation statistics on page 3192
Table 239 on page 3191 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Field Description
Group name.
Number of concurrent sessions for each group. The default is 2. The number
is configurable with the
Resource public key infrastructure (RPKI) cache session IP address.
State of the connection between the routing device and the cache server.
means that the connection is up.
up.
Chapter 42: Operational Commands
show validation statistics
max-sessions statement.
Connect means that the connection is not
Up
3191