Juniper ACX1000 Configuration Manual page 3094

ACX Series Universal Access Router Configuration Guide
3036
Task: Common L2 VC
Announcement bits (2): 0-KRT 1-Common L2 VC
AS path: I
Communities: target:11111:1 Layer2-info: encaps:VPLS,
control flags:, mtu: 0
Indirect next hops: 1
inet6.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden)
2001:db8::10:255:71:52/128 (1 entry, 0 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 1
Next hop: via lo0.0, selected
State: <Active Int>
Local AS:
Age: 1:34:07
Task: IF
AS path: I
fe80::280:42ff:fe10:f179/128 (1 entry, 0 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 1
Next hop: via lo0.0, selected
State: <Active NoReadvrt Int>
Local AS:
Age: 1:34:07
Task: IF
AS path: I
ff02::2/128 (1 entry, 1 announced)
TSI:
KRT in-kernel ff02::2/128 -> {}
*PIM Preference: 0
Next-hop reference count: 18
State: <Active NoReadvrt Int>
Local AS:
Age: 1:34:08
Task: PIM Recv6
Announcement bits (1): 0-KRT
AS path: I
ff02::d/128 (1 entry, 1 announced)
TSI:
KRT in-kernel ff02::d/128 -> {}
*PIM Preference: 0
Next-hop reference count: 18
State: <Active NoReadvrt Int>
Local AS:
Age: 1:34:08
Protocol next hop: 203.0.113.103 Metric: 2
Push 800012
Indirect next hop: 87272e4 1048574
Indirect path forwarding next hops: 1
Next hop: 203.0.113.216 via ge-3/1/0.0 weight 0x1
203.0.113.103/32 Originating RIB: inet.3
Metric: 2
Forwarding nexthops: 1
Nexthop: 203.0.113.216 via ge-3/1/0.0
64496
64496
64496
64496
Node path count: 1
Copyright © 2017, Juniper Networks, Inc.