Juniper ACX1000 Configuration Manual page 3247

Table 238: show validation session Output Fields (continued)
Field Name
State
Flaps
Uptime
#IPv4/IPv6 records
Session index
Group
Preference
Port
Refresh time
Hold time
Copyright © 2017, Juniper Networks, Inc.
Field Description
State of the connection between the routing device and the cache
server. Up means that the connection is established.
that the connection is not established.
Number of attempts to establish a session.
Length of time that the session has remained establshed.
Number of IPv4 and IPv6 route validation records.
Every session has an index number.
Name of the group to which the session belongs
Each cache server has a preference. Higher preferences are preferred.
During a session start or restart, the routing device attempts to start
a session with the cache server that has the numerically highest
preference. The routing device connects to multiple cache servers
in preference order.
The default preference is 100. The preference is configurable with
the statement.
preference
TCP port number for the outgoing connection with the cache server.
The well-known RPKI port is TCP port 2222. For a given deployment,
an RPKI cache server might listen on some other TCP port number.
If so, you can configure the alternative port number with the
statement.
Liveliness check interval for an RPKI cache server. Every
(seconds), a serial query protocol data unit (PDU) with the last
known serial number is transmitted. The
2 x the .
refresh-time
Length of time in seconds that the session between the routing
device and the cache server is considered operational without any
activity. After the hold time expires, the session is dropped.
Reception of any PDU from the cache server resets the hold timer.
The hold-time is 600 seconds, by default, and must be least 2 x the
refresh-time . If the hold time expires, the session is considered to be
down. This, in turn, triggers a session restart event. During a session
restart, the routing device attempts to start a session with the cache
server that has the numerically highest
Chapter 42: Operational Commands
Connect means
port
refresh-time
hold-time must be at least
preference .
Level of
Output
All levels
None and
brief
None and
brief
None and
brief
detail
detail
detail
detail
detail
detail
3189