Show Isis Database - Juniper ACX1000 Configuration Manual

show isis database

List of Syntax
Syntax
Syntax (EX Series
Switches and QFX
Series)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 2677
Syntax (EX Series Switches and QFX Series) on page 2677
show isis database
<system-id>
<brief | detail | extensive>
<instance instance-name>
<level (1 | 2)>
<logical-system (all | logical-system-name)>
show isis database
<system-id>
<brief | detail | extensive>
<level (1 | 2)>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Command introduced in Junos OS Release 15.1X53-D30 for the QFX10002 switch.
Display the entries in the Intermediate System-to-Intermediate System (IS-IS) link-state
database, which contains data about PDU packets.
none—Display standard information about IS-IS link-state database entries for all routing
instances.
system id—(Optional) Display IS-IS link-state database entries for the specified
intermediate system.
brief | detail | extensive—(Optional) Display the specified level of output.
instance instance-name—(Optional) Display IS-IS link-state database entries for the
specified routing instance.
level (1 | 2)—(Optional) Display IS-IS link-state database entries for the specified IS-IS
level.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
clear isis database
Chapter 42: Operational Commands
2677