Juniper ACX1000 Configuration Manual page 3222

ACX Series Universal Access Router Configuration Guide
Table 232: show services rpm rfc2544-benchmarking test-id Output Fields (continued)
Field Name Field Description
(ACX Series routers only) Details of the throughput test
Rfc2544
throughput test
information
Percentage of the steady state load for the test.
Initial test load
percentage
Test iteration mode Mode of the test iteration: Binary or step-down.
Test iteration step The test step percentage for tests. If not specified, the default step-percent is
10 percent. This parameter is ignored for all type of tests other than frame-loss
percent
tests.
The theoretical limit of the media for the frame size configured for the test. This
Theoretical max
value is typically set to the bandwidth of the server being tested.
bandwidth
Packet size of the test frames in bytes.
Test packet size:
Number of the test iteration.
Iteration
Period in seconds for which the test iteration is run
Duration (sec)
Amount of time that has passed, in seconds, since the start of the test.
Elapsed time
Total count of packets-per-second (pps) transmitted during the test.
pps
Number of transmitted test packets.
Tx Packets
Rx Packets Number of received test packets.
Tx Bytes Number of transmitted bytes.
Rx Bytes Number of received bytes.
Percentage Percentage of throughput for the test iteration.
throughput
Result of the Results of the completed throughput test for a particular packet size.
iteration runs
(Throughput) :
Number of the iteration with the highest throughout, among the listed iterations.
Best iteration
Packets-per-second (pps) count of the iteration with the highest throughout,
Best iteration (pps)
among the listed iterations.
Percentage of throughput of the iteration with the highest throughout, among
Best iteration
the listed iterations.
throughput
3164
Level of Output
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
detail
Copyright © 2017, Juniper Networks, Inc.