Juniper ACX1000 Configuration Manual page 2752

ACX Series Universal Access Router Configuration Guide
List of Sample Output
Output Fields
Table 158: show isis interface Output Fields
Field Name Field Description
interface-name Name of the interface.
Designated router Routing device selected by other routers that is responsible for sending link-state
advertisements that describe the network. Used only on broadcast networks.
Interface index assigned by the Junos OS kernel.
Index
Internal implementation information.
State
Circuit identifier.
Circuit id
NOTE:
within the linkstate database. All interfaces (loopback, broadcast, and so on)
and all point-to-point links share the locally significant value of 0x01, and this
value is not incremented.
Circuit type:
Circuit type
1 —Level 1 only
2 —Level 2 only
—Level 1 and Level 2
3
Interval between link-state PDUs sent from the interface.
LSP interval
Interval between complete sequence number PDUs sent from the interface.
CSNP interval
System identifier.
Sysid
Interface through which the adjacency is made.
Interface
Level:
L or Level
—Level 1 only
1
2 —Level 2 only
3 —Level 1 and Level 2
NOTE:
IS-IS level configured on other IS-IS interfaces in a router. You can also configure
IS-IS level on loopback interfaces per your requirement.
CirID Circuit identifier.
2694
show isis interface on page 2696
show isis interface brief on page 2696
show isis interface detail on page 2696
show isis interface extensive on page 2696
Table 158 on page 2694 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Each IS-IS interface is assigned a circuit ID value to identify the interface
The default IS-IS level on loopback interfaces are always same as the
command.
show isis interface
Level of Output
detail
detail
detail
detail
detail
detail
detail
detail extensive
detail
none
brief
All levels
none brief
Copyright © 2017, Juniper Networks, Inc.